BGS Data Catalogue
Multiscale models for MCFC, Fischer-Tropsch synthesis and CO2 compression
A Multiphysics model for a molten carbonate fuel cell (MCFC) developed in COMSOL. This is a multiphysics model for a MCFC. It has been built using COMSOL Multiphysics®. It enables the user to investigate the composition of the fuel and flue gases as well as the design parameters (e.g. the thickness of the electrolyte) on the performance of the fuel cell and the efficiency of CO2 capture. For example, the impact of CO2 concentration in the flue gas on the fuel cell performance and the carbon capture factor (which is a measure on how much CO2 has been concentrated from the flue gas) could be evaluated. One of the key findings show that the fuel cell performance improves and the carbon capture factor decreases with increasing CO2 in the flue gas. A process model for liquid fuel production through reverse water gas shift (RWGS) and Fischer-Tropsch (FT) developed in Aspen Plus. The model enables the user to examine the production of liquid fuels through CO2 hydrogenation followed by FT synthesis. The user can test different conditions for the RWGS such as H2/CO2 ratio and temperature and investigate how these changes affect the CO2 conversion. The product distribution for the FT follows the Anderson–Schulz–Flory (ASF) distribution. The ASF model is applied in a FORTRAN calculator and assumes a chain growth probability factor (α) of 0.9; the user may change the value of α and investigate how this affects the product distribution. A CO2 compression model developed in Aspen Plus. The model liquefies the captured CO2 stream through multistage compression with intermediate cooling and water condensation/removal. UKCCSRC Flexible Funds 2020.
Default
Identification info
- Metadata Language
- English (en)
- Dataset Reference Date ()
- 2022-01-11
University of Sheffield
-Stavros Michailos
Ella armitage building, 40 Leavygreave Rd
,Sheffield
,S3 7RD
,- Maintenance and update frequency
- notApplicable
- GEMET - INSPIRE themes
- BGS Thesaurus of Geosciences
-
-
Simulation
-
Carbon capture and storage
-
- Keywords
-
-
NERC_DDC
-
- Limitations on Public Access
- otherRestrictions
- Other constraints
- restricted
- Use constraints
- otherRestrictions
- Other constraints
-
The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.
- Other constraints
-
Either: (i) the dataset is made freely available, e.g. via the Internet, for a restricted category of use (e.g. educational use only); or (ii) the dataset has not been formally approved by BGS for access and use by external clients under licence, but its use may be permitted under alternative formal arrangements; or (iii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted in order to determine the permitted usage of the dataset. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant use restrictions. This staff member should revert to the IPR Section (ipr@bgs.ac.uk) for advice, should the position not be clear. ipr@bgs.ac Either: (i) the dataset is made freely available, e.g. via the Internet, for a restricted category of use (e.g. educational use only); or (ii) the dataset has not been formally approved by BGS for access and use by external clients under licence, but its use may be permitted under alternative formal arrangements; or (iii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted in order to determine the permitted usage of the dataset. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant use restrictions. This staff member should revert to the IPR Section (ipr@bgs.ac.uk) for advice, should the position not be clear.
- Topic category
-
- Geoscientific information
- Begin date
- 2020-03-01
- End date
- 2021-10-30
Spatial Reference System
Distribution Information
- Data format
-
-
BKP file
() -
MPH file
()
-
- Resource Locator
- Data
- Resource Locator
- Data
- Quality Scope
- nonGeographicDataset
- Other
-
non geographic dataset
Report
- Dataset Reference Date ()
- 2011
- Explanation
-
See the referenced specification
- Degree
Report
- Dataset Reference Date ()
- 2010-12-08
- Explanation
-
See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF
- Degree
- Statement
-
Where necessary, process conditions to build the attached models have been mostly retrieved from relevant literature.
Metadata
- File identifier
- d5de2d73-ff15-6b93-e054-002128a47908 XML
- Metadata Language
- English (en)
- Resource type
- nonGeographicDataset
- Hierarchy level name
-
non geographic dataset
- Metadata Date
- 2023-03-30
- Metadata standard name
- UK GEMINI
- Metadata standard version
-
2.3
British Geological Survey
The Lyell Centre, Research Avenue South
,EDINBURGH
,LOTHIAN
,EH14 4AP
,United Kingdom
