Corrosivity Map for the UK

The dataset is a Soil Corrosivity Map for the U.K. based on the BGS DIGMapGB-PLUS Map. The creation of this dataset involves scoring the Soil Parent Material types for five different attributes that contribute towards the corrosion of underground assets. These are (i) high or low soil pH, (ii) general soil moisture, (iii) the likelihood that soil saturated and undergo periods of anaerobic conditions, (iv) the presence of sulphides and sulphates and (v) the resistivity of the soil parent material. The scoring of each of these parameters was undertaken based on the Cast Iron Pipe Association (CIPA) (now the Ductile Iron Pipe Research Association, DIPRA) rating system. By combining the scores of each parameter a GIS layer has been created that identifies those areas that may provide a corrosive environment to underground cast iron assets. The final map has been classified into three categories signifying: 'GROUND CONDITIONS BENEATH TOPSOIL ARE UNLIKELY TO CAUSE CORROSION OF IRON', 'GROUND CONDITIONS BENEATH TOPSOIL MAY CAUSE CORROSION TO IRON', 'GROUND CONDITIONS BENEATH TOPSOIL ARE LIKELY TO CAUSE CORROSION TO IRON'. The dataset is designed to aid engineers and planners in the management of and maintenance of underground ferrous assets.

Alternate title: CorrosivityGB_v1

Date (Publication): 2011-10-10

Citation identifier: http://data.bgs.ac.uk/id/dataHolding/13605576

Point of contact

Organisation name	Individual name	Electronic mail address	Role
British Geological Survey	Enquiries	enquiries@bgs.ac.uk	Distributor
British Geological Survey	Enquiries	enquiries@bgs.ac.uk	Point of contact
British Geological Survey	Enquiries	enquiries@bgs.ac.uk	Principal investigator
British Geological Survey	Enquiries	enquiries@bgs.ac.uk	Resource provider

Maintenance and update frequency: As needed

GEMET - INSPIRE themes, version 1.0

Geology

BGS Thesaurus of Geosciences

Chlorides
Iron
Resistivity
Sulphides
Sulphates
UK Location (INSPIRE)
Corrosion

dataCentre

UK Location (INSPIRE)

Keywords

NERC_DDC

Access constraints: Other restrictions

Other constraints: license

Other constraints: Either : (i) the dataset has not been formally approved by BGS for access and use by external clients under license; and / or (ii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted before the dataset can be provided to, or accessed by, BGS staff or external clients. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant access restrictions. This staff member should revert to the IPR Section (IPR@bgs.ac.uk) for advice, should the position not be clear.

Use constraints: Other restrictions

Other constraints: The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.

Other constraints: The dataset is made available to external clients under BGS Digital Data Licence terms and conditions. Revert to the IPR Section ( iprdigital@bgs.ac.uk) if further advice is required with regard to permitted usage.

Spatial representation type: Vector

Denominator: 50000

Language: English

Topic category

Geoscientific information

Geographic identifier: GBN
ISO 3166_2 2009 revision

Geographic identifier: GREAT BRITAIN [id=139600]
British Geological Survey Gazetteer: Geographical hierarchy from Geosaurus 1979 creation

Begin date: 2011-05-16 After

End date: 2011-11-23 Before

Unique resource identifier: OSGB 1936 / British National Grid (EPSG::27700)

Distribution format

Name	Version
ArcGIS Shapefile	any

Distributor contact

Organisation name	Individual name	Electronic mail address	Role
British Geological Survey	Enquiries	enquiries@bgs.ac.uk	Distributor

OnLine resource

Protocol	Linkage	Name
HTTP	http://www.bgs.ac.uk/	BGS Homepage

Hierarchy level: Dataset

Other: dataset

Conformance result

Title: INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology

Date (Publication): 2011

Explanation: See the referenced specification

Pass: No

Conformance result

Title: Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services

Date (Publication): 2010-12-08

Explanation: See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF

Pass: No

Statement: The Corrosivity (Ferrosu) dataset comprises a series of layers (water content, pH, redox, resistivity and sulphates/sulphides) where the ‘potential for corrosion’ of each of the properties is scored. The separate GIS property layers contain the scores for each property according to the Cast Iron Pipe Research Association rating (Table 1). These are then combined to give an overall corrosion rating. By having separate layers as well as a combined score layer, the user can see which of the corrosion causing factors is/are detrimental so appropriate engineering remedies can be undertaken if required. It also allows for easier and better data checking.