GeoSure Slope Instability

The GeoSure data sets and reports from the British Geological Survey provide information about potential ground movement or subsidence in a helpful and user-friendly format. The reports can help inform planning decisions and indicate causes of subsidence. The methodology is based on BGS DiGMap (Digital Map) and expert knowledge of the behaviour of the formations so defined. This dataset provides an assessment of slope instability. Landslide hazard occurs due to particular slope characteristics (such as geology, gradient, sources of water, drainage, man-made constructions) combining to cause the slope to become unstable. Downslope movement of materials, such as a landslide or rockfall may lead to a loss of support and damage to buildings. Complete Great Britain national coverage is available. The storage formats of the data are ESRI and MapInfo but other formats can be supplied.

Date (Creation): 2005-05-09

Citation identifier: http://data.bgs.ac.uk/id/dataHolding/13603029

Point of contact

Organisation name	Individual name	Electronic mail address	Role
British Geological Survey	Enquiries	enquiries@bgs.ac.uk	Distributor
British Geological Survey	Enquiries	enquiries@bgs.ac.uk	Point of contact
British Geological Survey	Enquiries	enquiries@bgs.ac.uk	Custodian

Maintenance and update frequency: As needed

GEMET - INSPIRE themes, version 1.0

Geology

BGS Thesaurus of Geosciences

Natural hazards
UK Location (INSPIRE)
Scottish SDI

dataCentre

Keywords

NERC_DDC

Access constraints: Other restrictions

Other constraints: This information has commercial potential and access should be subject to the Programme Manager's approval (M Harrison). The information should not be used to indicate actual hazard at a site. It does not assess if the hazard is actually present. This can only be determined by a site specific assessment.

Use constraints: Other restrictions

Other constraints: The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.

Other constraints: Either: (i) the dataset is made freely available, e.g. via the Internet, for a restricted category of use (e.g. educational use only); or (ii) the dataset has not been formally approved by BGS for access and use by external clients under licence, but its use may be permitted under alternative formal arrangements; or (iii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted in order to determine the permitted usage of the dataset. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant use restrictions. This staff member should revert to the IPR Section ( ipr@bgs.ac.uk) for advice, should the position not be clear.

Spatial representation type: Vector

Denominator: 50000

Language: English

Topic category

Geoscientific information

Geographic identifier: ENG
ISO 3166_1 alpha-3 2009 revision

Geographic identifier: ENGLAND [id=150000]
British Geological Survey Gazetteer: Geographical hierarchy from Geosaurus 1979 creation

Geographic identifier: SCOTLAND [id=140000]
British Geological Survey Gazetteer: Geographical hierarchy from Geosaurus 1979 creation

Geographic identifier: SCT
ISO 3166_1 alpha-3 2009 revision

Geographic identifier: WALES [id=170000]
British Geological Survey Gazetteer: Geographical hierarchy from Geosaurus 1979 creation

Geographic identifier: WLS
ISO 3166_1 alpha-3 2009 revision

Supplemental Information: Geotechnical data abstracted from NGDC site investigation collection and entered into the BGS geotechnical database. Methodology may be revised in the light of new knowledge or customer feedback. Changes in DiGMapGB-50 base data will require periodic or continuous revision. ADDITIONAL_INFO 1 = Complete GB National Coverage, subject to revision in line with changes in DiGMapGB-50 lithology codes. Based on 1:50 000 DiGMapGB-50 linework. Methodology consistent throughout. Otherwise subject to logical consistency of DiGMapGB-50.

Unique resource identifier: OSGB 1936 / British National Grid (EPSG::27700)

Distribution format

Name	Version
ESRI Shapefile	Current BGS version

Distributor contact

Organisation name	Individual name	Electronic mail address	Role
British Geological Survey	Enquiries	enquiries@bgs.ac.uk	Distributor

OnLine resource

Protocol	Linkage	Name
	http://www.bgs.ac.uk/products/geosure/home.html	BGS GeoSure Homepage

Hierarchy level: Dataset

Conformance result

Title: INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology

Date (Publication): 2011

Explanation: See the referenced specification

Pass: No

Conformance result

Title: Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services