GeoSure Compressible Deposits

The GeoSure data sets and reports from the British Geological Survey provide information about potential ground movement or subsidence in a helpful and user-friendly format. The reports can help inform planning decisions and indicate causes of subsidence. The methodology is based on BGS DiGMap (Digital Map) and expert knowledge of the behaviour of the formations so defined. This dataset provides an assessment of the potential for a geological deposit to compress under an applied load, a characteristic usually of superficial deposits such as peat or alluvium. Some types of ground may contain layers of very soft materials like clay or peat. These may compress if loaded by overlying structures, or if the groundwater level changes, potentially resulting in depression of the ground and disturbance of foundations. Complete Great Britain national coverage is available. The storage formats of the data are ESRI and MapInfo but other formats can be supplied.

Date (Creation): 2005-05-09

Citation identifier: http://data.bgs.ac.uk/id/dataHolding/13603026

Point of contact

Organisation name	Individual name	Electronic mail address	Role
British Geological Survey	Enquiries	enquiries@bgs.ac.uk	Distributor
British Geological Survey	Enquiries	enquiries@bgs.ac.uk	Point of contact
British Geological Survey	Enquiries	enquiries@bgs.ac.uk	Custodian

Maintenance and update frequency: As needed

GEMET - INSPIRE themes, version 1.0

Geology

BGS Thesaurus of Geosciences

UK Location (INSPIRE)
Scottish SDI
Natural hazards

dataCentre

Keywords

NERC_DDC

Access constraints: Other restrictions

Other constraints: This information has commercial potential and access should be subject to the Programme Manager's approval (M Harrison). The information should not be used to indicate actual hazard at a site. It does not assess if the hazard is actually present. This can only be determined by a site specific assessment.

Use constraints: Other restrictions

Other constraints: The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.

Other constraints: The dataset is made available to external clients under BGS Digital Data Licence terms and conditions. Revert to the IPR Section ( iprdigital@bgs.ac.uk) if further advice is required with regard to permitted usage.

Spatial representation type: Vector

Denominator: 50000

Language: English

Topic category

Geoscientific information

Geographic identifier: ENG
ISO 3166_1 alpha-3 2009 revision

Geographic identifier: ENGLAND [id=150000]
British Geological Survey Gazetteer: Geographical hierarchy from Geosaurus 1979 creation

Geographic identifier: SCOTLAND [id=140000]
British Geological Survey Gazetteer: Geographical hierarchy from Geosaurus 1979 creation

Geographic identifier: SCT
ISO 3166_1 alpha-3 2009 revision

Geographic identifier: WALES [id=170000]
British Geological Survey Gazetteer: Geographical hierarchy from Geosaurus 1979 creation

Geographic identifier: WLS
ISO 3166_1 alpha-3 2009 revision

Supplemental Information: Geotechnical data abstracted from NGDC site investigation collection and entered into the BGS geotechnical database. Methodology may be revised in the light of new knowledge or customer feedback. Changes in DiGMapGB-50 base data will require periodic or continuous revision. ADDITIONAL_INFO 1 = Complete GB National Coverage, subject to revision in line with changes in DiGMapGB-50 lithology codes. Based on 1:50 000 DiGMapGB-50 linework. Methodology consistent throughout. Otherwise subject to logical consistency of DiGMapGB-50.

Unique resource identifier: OSGB 1936 / British National Grid (EPSG::27700)

Distribution format

Name	Version
ESRI Shapefile	Current BGS version
MapInfo	Current BGS version

Distributor contact

Organisation name	Individual name	Electronic mail address	Role
British Geological Survey	Enquiries	enquiries@bgs.ac.uk	Distributor

OnLine resource

Protocol	Linkage	Name
	http://www.bgs.ac.uk/products/geosure/home.html	BGS GeoSure Homepage

Hierarchy level: Dataset

Conformance result

Title: INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology

Date (Publication): 2011

Explanation: See the referenced specification

Pass: No

Conformance result

Title: Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services