Data associated with journal article 'Modelling of high purity H2 production via sorption enhanced chemical looping steam reforming of methane in a packed bed reactor'. Syed Zaheer Abbas, Valerie Dupont, Tariq Mahmud (2017)

Data derived from UKCCSRC Call 2 Project C2-181. The journal article can be found at http://dx.doi.org/10.1016/j.fuel.2017.03.072. Sorption enhanced chemical looping steam reforming of methane (SE-CLSR) relies on the exothermicity of both a metal catalyst’s oxidation and the in situ CO2 capture by carbonation onto a solid sorbent to provide the heat demand of hydrogen (H2) production by steam reforming while generating a nearly pure H2 product. A brief thermodynamic analysis to study the main features of the SE-CLSR process is done prior to the reactor modelling work. Later, one dimensional mathematical model of SE-CLSR process in the packed bed configuration is developed using gPROMS model builder 4.1.0 under the adiabatic conditions. This model combines reduction of the NiO catalyst with the steam reforming reactions, followed by the oxidation of the Ni-based reduced catalyst. The individual models of NiO reduction, steam reforming with in situ CO2 capture on Ca-sorbent, and Ni re-oxidation are developed by using kinetic data available in literature and validated against previous published work. The model of SE-CLSR is then applied to simulate 10 alternative cycles of the fuel and air feed in the reactor. The performance of the model is studied in terms of CH4 conversion, CO2 capture efficiency, purity and yield of H2. The sensitivity of the process is studied under the various operating conditions of temperature, pressure, molar steam to carbon ratio (S/C) and mass flux of the gas phase. In this work, the operating conditions used for the production of H2 represent realistic industrial production conditions. The sensitivity analysis demonstrates that the developed model of SE-CLSR process has the flexibility to simulate a wide range of operating conditions of temperature, pressure, S/C and mass flux of the gas phase.

Date (Creation): 2014-09

Citation identifier: http://data.bgs.ac.uk/id/dataHolding/13607181

Point of contact

Organisation name	Individual name	Electronic mail address	Role
University of Leeds	Valerie Dupont	not available	Point of contact
University of Leeds	Valerie Dupont	not available	Principal investigator
University of Engineering and Technology Lahore	Syed Zaheer Abbas	not available	Point of contact

Maintenance and update frequency: notApplicable

GEMET - INSPIRE themes, version 1.0

Geology

BGS Thesaurus of Geosciences

Carbon capture and storage
NGDC Deposited Data
UKCCS

dataCentre

Keywords

NERC_DDC

Access constraints: Other restrictions

Other constraints: intellectualPropertyRights

Other constraints: Either : (i) the dataset has not been formally approved by BGS for access and use by external clients under license; and / or (ii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted before the dataset can be provided to, or accessed by, BGS staff or external clients. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant access restrictions. This staff member should revert to the IPR Section (IPR@bgs.ac.uk) for advice, should the position not be clear.

Use constraints: Other restrictions

Other constraints: The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.

Other constraints: Either: (i) the dataset is made freely available, e.g. via the Internet, for a restricted category of use (e.g. educational use only); or (ii) the dataset has not been formally approved by BGS for access and use by external clients under licence, but its use may be permitted under alternative formal arrangements; or (iii) the dataset contains 3rd party data or information obtained by BGS under terms and conditions that must be consulted in order to determine the permitted usage of the dataset. Refer to the BGS staff member responsible for the creation of the dataset if further advice is required. He / she should be familiar with the composition of the dataset, particularly with regard to 3rd party IPR contained in it, and any resultant use restrictions. This staff member should revert to the IPR Section ( ipr@bgs.ac.uk) for advice, should the position not be clear.

Language: English

Topic category

Geoscientific information

Begin date: 2017-03-23

Reference System Information

No information provided.

Distribution format

Name	Version
.xlsx

OnLine resource

Protocol	Linkage	Name
	http://www.bgs.ac.uk/ukccs/accessions/index.html#item77469

Hierarchy level: Non geographic dataset

Other: non geographic dataset

Conformance result

Title: INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology

Date (Publication): 2011

Explanation: See the referenced specification

Pass: No

Conformance result

Title: Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services

Date (Publication): 2010-12-08

Explanation: See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF

Pass: No

Statement: The excel file containing the additional data to the paper was constructed from the data used to make all the figures and tables in the paper.