Direct testing of forsterite bicrystals via in-situ micropillar experiments at 700 deg C (NERC Grant NE/S00162X/1)
The mechanics of olivine deformation play a key role in long-term planetary processes, including the response of the lithosphere to tectonic loading or the response of the solid Earth to tidal forces, and in short-term processes, such as post-seismic creep within the upper mantle. Previous studies have emphasized the importance of grain-size effects in the deformation of olivine. Most of our understanding of the role of grain boundaries in the deformation of olivine is inferred from comparison of experiments on single crystals to experiments on polycrystalline samples, as there are no direct studies of the mechanical properties of individual grain boundaries in olivine. In this study, we use high-precision mechanical testing of synthetic forsterite bicrystals with well characterized interfaces to directly observe and quantify the mechanical properties of olivine grain boundaries. We conduct in-situ micropillar compression tests at high-temperature (700°C) on bicrystals containing low-angle (4• tilt about [100] on (014)) and high-angle (60• tilt about [100] on (011)) boundaries. During the in-situ tests, we observe differences in deformation style between the pillars containing the grain boundary and the pillars in the crystal interior. In the pillars containing the grain boundary, the interface is oriented at ∼ 45° to the loading direction to promote shear. In-situ observations and analysis of the mechanical data indicate that pillars containing the grain boundary consistently support elastic loading to higher stresses than the pillars without a grain boundary. Moreover, the pillars without the grain boundary sustain larger plastic strain. Post-deformation microstructural characterization confirms that under the conditions of these deformation experiments, sliding did not occur along the grain boundary. These observations support the hypothesis that grain boundaries are stronger relative to the crystal interior at these conditions. This data set is associated with the pre-print manuscript with the DOI: 10.22541/essoar.167979601.17867144/v1
Simple
- Date (Creation)
- 2023-11-06
- Citation identifier
- http://data.bgs.ac.uk/id/dataHolding/13608146
- Point of contact
-
Organisation name Individual name Electronic mail address Role University of Oxford
Diana Avadanii
not available
Originator British Geological Survey
Enquiries
not available
Distributor British Geological Survey
Enquiries
not available
Point of contact
- Maintenance and update frequency
- notApplicable
-
GEMET - INSPIRE themes, version 1.0
-
BGS Thesaurus of Geosciences
-
-
NGDC Deposited Data
-
Compression tests
-
Deformation (materials)
-
Olivine
-
Physical properties
-
- dataCentre
- Keywords
-
-
NERC_DDC
-
- Access constraints
- Other restrictions
- Other constraints
- licenceOGL
- Use constraints
- Other restrictions
- Other constraints
-
The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.
- Other constraints
-
Available under the Open Government Licence subject to the following acknowledgement accompanying the reproduced NERC materials "Contains NERC materials ©NERC [year]"
- Language
- English
- Topic category
-
- Geoscientific information
- Begin date
- 2019-11-01
- End date
- 2021-03-01
Reference System Information
- Distribution format
-
Name Version .mp4
JPG File (.jpg)
AI File (.ai)
ASV File (.asv)
EPS File (.eps)
FIG File (.fig)
M File (.m)
PNG File (.png)
Microsoft Word Document (.docx)
- Distributor contact
-
Organisation name Individual name Electronic mail address Role British Geological Survey
Enquiries
not available
Distributor
- OnLine resource
-
Protocol Linkage Name https://webapps.bgs.ac.uk/services/ngdc/accessions/index.html#item182971 Data
- Hierarchy level
- Non geographic dataset
- Other
-
non geographic dataset
Conformance result
- Title
-
INSPIRE Implementing rules laying down technical arrangements for the interoperability and harmonisation of Geology
- Date (Publication)
- 2011
- Explanation
-
See the referenced specification
- Pass
- No
Conformance result
- Title
-
Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services
- Date (Publication)
- 2010-12-08
- Explanation
-
See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF
- Pass
- No
- Statement
-
We investigate two pure forsterite (Fo) bicrystal samples containing a low-angle grain boundary (LAGB, 4◦93 , [100]/(014)) and a high-angle grain boundary (HAGB, 60°, [100]/(011)), respectively. We tilted the bicrystals in a steel mount and polished a surface at 45° 110 to the grain-boundary plane. The surfaces were polished flat using diamond polycrystalline 113 suspensions with grit sizes ranging from 9 μm down to 0.05 μm. Micropillars with nominal diameters of 2–2.5 μm and a height-to-diameter ratio of ∼1:3 were manufactured with a Zeiss-AURIGA Ga+ focused ion beam (FIB) using currents from 2 nA to 50 pA. The micropillars were compressed using a flat-end diamond tip with a nominal diameter of 10 μm. We deformed the micropillars in-situ with a Hysitron PI88 SEM Picoindenter. The in-situ images were captured with a custom TESCAN Mira3 SEM. The mechanical tests were performed at 700◦C.
Metadata
- File identifier
- 0bc51c9d-10ca-58ac-e063-0937940ae41d XML
- Metadata language
- English
- Hierarchy level
- Non geographic dataset
- Hierarchy level name
-
non geographic dataset
- Date stamp
- 2024-12-07
- Metadata standard name
- UK GEMINI
- Metadata standard version
-
2.3
- Metadata author
-
Organisation name Individual name Electronic mail address Role British Geological Survey
Point of contact
- Dataset URI